Nothing is Impossible

Galvanized Profiles – HR


Quality : DX51D+Z – DX52D+Z – DX53D+Z – DX54D+Z – DX56D+Z – DX57D+Z

Standard : EN 10346

Outer Diameter : 20×20 – 125×125 mm

Wall Thickness : 1,0 – 3,0 mm

Length: 4,0 – 13,0 m

Kategoriler:

Galvanized Profiles

What are Galvanized Profiles?

Galvanization, especially this procedure against rust, is made to prolong the life of metals that will work outside in all weather conditions. If chromate is coated on the galvanized metal, the life of the metal is extended. Iron material should be designed in a way that is suitable for galvanization during the construction phase. In other words, galvanized profiles are long-lasting and are used more than anti-rust profiles. Galvanized profiles are produced from galvanized sheet. In addition to this, black profiles can also be produced by dipping method afterwards. However, galvanized profiles produced in this way do not last long. Therefore, products made of galvanized sheet or produced as hot-dip should be chosen.

Usage areas

Galvanized profiles are used in most construction projects, in exterior cladding, in machine construction, in most interiors for decoration, in the need to use profiles on wet surfaces such as pools and jacuzzis, and in steel construction steel roofs, etc. It is used very much in buildings such as ironwork, in the most important agriculture and greenhouse installation in agriculture. Galvanized profiles are made by applying the galvanizing method to standard profiles. The purpose of the galvanizing procedure is to prevent further corrosion. The most common technique for the galvanizing procedure is the hot-dip galvanizing technique, which is made by immersing the profiles in a zinc bath. Galvanized profile has similar qualities with standard profile products, but their being galvanized offers many different advantages. Oval profile and square profile products are available in their standard versions, as well as in galvanized versions. These galvanized profile products are used where resistance and durability are mandatory. Among these profile dimensions, there are various dimensions that you can find solutions for your needs. Galvanized profiles manufactured from galvanized sheet and galvanized sheet are also used for decoration purposes. Since it is a material with high paint retention, it is possible to paint these profiles and use them decoratively in buildings or open areas. These materials are also preferred in roof construction, thanks to their robustness and ability to hold loads.

Production Weight

Hot Dip Galvanizing;

Square Box Profile

Outer Diameter

20×20 – 100×100 mm

Wall Thickness

2,0 – 7,11 mm

Length

5,0 – 8,0 m

Production from Galvanized Sheet;

Square Box Profile

Outer Diameter

20×20 – 125×125 mm

Wall Thickness

1,0 – 3,0 mm

Length

4,0 – 13,0 m

Rectangular Box Profile;

Outer Diameter

20×30 – 80×160 mm

Wall Thickness

1,0 – 3,0 mm

Length

4,0 – 13,0 m


tr_TRTurkish