Blind

Euro Quality : DX51D+Z – DX52D+Z – DX53D+Z – DX53D+Z – DX54D+Z – DX56D+Z – DX57D+Z

Erdemir Quality : 1311 – 1312 – 1313 – 1303 – 1314 – 1315 – 1317

Width : 804 mm

Length: 1000 – 3200 mm

Wall Thickness : 0,30 – 0,70 mm

Kategoriler: Sac-En

Roller Sheet

What is Roller Sheet?

It is the form of aluminum or painted products as roller blinds. Roller blinds can be drawn in any aluminum sheet size you want.

If the blind is pulled out of 1000 mm wide material, the useful area will be 800 mm.
If the roller is pulled out of 1250 mm wide material, the useful area will be 950 mm.
Radius spacing is 3 cm (distance between two grooves width), Radius height can be adjusted between 10-20 mm.
Sheet Thickness: Min. 0.30mm / Max. 0.70mm
Sheet Length: Min. 1000mm / Max. 3200mm
Sheet Useful Area Width: 804 mm (Tolerance: + 25 mm, -15 mm)

Usage areas

In shop and store buildings,
In the production of shutters and blinds,
It is used in decorative roof and facade coatings.
Zinc coating amount is in accordance with Turkish and World standards.

Quality

(EN 10327)

DX51 D+Z Painted Galvanized Sheet (top coat polyester paint over primer)

Chemical Composition (%)

Standard Equivalent		ERDEMİR Quality No	C max.	Si max.	Mn max.	P max.	S max.	Ti max.
Standard	Quality	ERDEMİR Quality No	C max.	Si max.	Mn max.	P max.	S max.	Ti max.
EN 10346	DX51D+Z	1311	0.18	0.50	1.20	0.12	0.045	0.30
EN 10346	DX52D+Z	1312	0.12	0.50	0.60	0.10	0.045	0.30
EN 10346	DX53D+Z	1313	0.12	0.50	0.60	0.10	0.045	0.30
EN 10346	DX53D+Z	1303	0.12	0.50	0.60	0.10	0.045	0.30
EN 10346	DX54D+Z	1314	0.12	0.50	0.60	0.10	0.045	0.30
EN 10346 EN 10346	DX56D+Z DX57D+Z	1315 1317	0.12 0.12	0.50 0.50	0.60 0.60	0.10 0.10	0.045 0.045	0.30 0.30

Mechanical Properties

Standard Equivalent		ERDEMİR Quality No	Warranty Periods(6)		Re Rp0.2/ReL N/mm²(kg/mm²)	R_m(1) N/mm²(kg/mm²)	A80⁽²⁾(%) min.	r90 min.	n90 min.
Standard Equivalent			Mechanical Values	Flow Trace(4) Not occurring
Standard	Quality		Mechanical Values	Flow Trace(4) Not occurring
EN 10346	DX51D+Z	1311	1 ay	–	–	270-500 (27.6-51.0)	22	–	–
EN 10346	DX52D+Z	1312	1 ay	–	140-300(³⁾(14.3-30.6)	270-420 (27.6-42.8)	26	–	–
EN 10346	DX53D+Z	1313	1 ay	–	140-260 (14.3-26.5)	270-380 (27.6-38.7)	30	–	–
EN 10346	DX53D+Z	1303	1 ay	–	140-260 (14.3-26.5)	270-380 (27.6-38.7)	30	–	–
EN 10346	DX54D+Z	1314	6 ay	6 ay	120-220 (12.2-22.4)	260-350 (26.5-35.7)	36	1.6⁽⁵⁾	0.18
EN 10346	DX56D+Z	1315	6 ay	6 ay	120-180 (12.2-18.4)	260-350 (26.5-35.7)	39	1.9⁽⁵⁾	0.21
EN 10346	DX57D+Z	1317	6 ay	6 ay	120-170 (12.2-17.3)	260-350 (26.5-35.7)	41	2.1⁽⁵⁾	0.22

Açıklamalar

Tensile test values are applied to “transverse” test specimens.
“Min. % elongation values are reduced by 2 units for products with a thickness range of 0.50 mm < t < 0.70 mm, including coating, by 4 units for products with a thickness range of 0.35 mm < t < 0.50 mm, and by 7 units for products with t < 0.35mm.
For surface quality A, the upper value of the yield strength will be 360 MPa.
The warranty period is applied to products requiring B and C surface quality.
For products with a thickness of 1.50<t<2.0mm, the r90 value is reduced by 0.2 units.
The warranty periods specified in the table begin when the material is reported to be manufactured and ready for shipment.

Weight Chart

THICKNESS	1M.Length Weight

mm	(kg/m)
0,30x860x1000	2,38
0,35x860x1000	2,53
0,40x860x1000	2,93
0,45x860x1000	3,34
0,50x860x1000	3,75

Turkish